Choosing an FFC/FPC connector board for computer peripherals comes down to a precise hardware decision: pin count and header format must match the board layout you are building around. These two Zaplyte two-piece connector-board sets share a double-sided PCB-support design, but the 10-pin right-angle pin-header version and 24-pin female-header-strip version serve meaningfully different configurations.
Quick verdict
Pick the 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter when the requirement is a 10-pin board with a right-angle pin header. Its listed price is $13.37, and its 33 x 20 mm overall size is the smaller of the two listed board formats.
Choose the 2pcs FFC FPC Connector Board 24 Pin Double Row Female Header Strip Adapter when the project calls for 24 pins and a female header strip. At 34 x 26 mm, it has the larger listed footprint and costs $21.06. The listed-price spread between the pair is $7.69.
At-a-glance comparison
| Detail | 10-Pin Right-Angle Pin Header Adapter | 24-Pin Female Header Strip Adapter |
|---|---|---|
| Listed price | $13.37 | $21.06 |
| Pack count | 2pcs | 2pcs |
| Pin count | 10 pins | 24 pins |
| Header format in title | Right-angle pin header | Female header strip |
| Overall size | 33 x 20 mm | 34 x 26 mm |
| Shared connection pitches | 0.5 mm FPC socket side; 1.0 mm FPC back side; 2.54 mm DIP | 0.5 mm FPC socket side; 1.0 mm FPC back side; 2.54 mm DIP |
Where each connector board wins
The 10-pin right-angle adapter is the direct choice for builds centered on a 10-pin FFC/FPC connection. Its right-angle pin-header wording is the clearest differentiator, while the smaller 33 x 20 mm dimensions may suit a layout planned around that board size.
The 24-pin female-header adapter is the more appropriate selection for a 24-pin configuration. Its 24-pin count is paired with a female header strip in the title, and the 34 x 26 mm board format provides a distinct physical specification from the 10-pin model.
Product notes
2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter
This two-piece Zaplyte cable-connector set is aimed at a 10-pin FFC/FPC board arrangement. The listed design combines a double-sided board with a single flat-cable socket, a 0.5 mm socket-side pitch, 1.0 mm back-side pitch, and 2.54 mm DIP pitch. Choose it when a 10-pin count and right-angle pin-header format are the key requirements; those details make the selection specific rather than general-purpose. The $13.37 listed price also places it below the 24-pin alternative. Its concrete limitation is the 10-pin configuration: it is not the 24-pin female-header-strip format offered by the other set. The product is listed as new and carries the stated California Prop 65 warning.
2pcs FFC FPC Connector Board 24 Pin Double Row Female Header Strip Adapter
The 24-pin Zaplyte set suits a build specified around a 24-pin FFC/FPC connector board and a female header strip. Like the 10-pin version, it is a two-piece, double-sided PCB-support board with a single flat-cable socket and the same listed 0.5 mm, 1.0 mm, and 2.54 mm pitch measurements. Select it for the larger 24-pin count and the 34 x 26 mm overall dimensions. That combination is the practical reason to choose it over the 10-pin right-angle board. The limitation is its $21.06 listed price, which is higher than the 10-pin set's listed price. It is also listed as new and includes the stated California Prop 65 warning.
Final choice by use case
For a 10-pin FFC/FPC board requirement, choose the 10-pin right-angle pin-header adapter. It is the more narrowly matched option and has the smaller listed board size.
For a 24-pin FFC/FPC board requirement, choose the 24-pin female-header-strip adapter. Its pin count and header format align with that distinct configuration, making it the clear alternative when 24 pins-not 10-are needed.
