Choosing an FFC/FPC adapter board comes down to more than finding a similarly sized PCB. Pin count, cable-side pitch, and pin orientation determine which layout suits the connection you are building. Here, the 10-pin right-angle board and the 4-pin bent-pin board both adapt flexible-cable connections to 2.54 mm DIP spacing, but they serve distinctly different configurations.
Quick verdict
Pick the 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter when a two-board quantity and a 10-pin right-angle format are central to the build. Pick the 4Pin 1.0 to 2.54 mm Double Row of Bent Pins Pull-down FFC FPC Adapter Board when the required layout is four pins and the bent-pin, pull-down form is the relevant match.
At-a-glance comparison
| Board | Listed price | Pin and pitch format |
|---|---|---|
| 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter | USD 13.37 | 10 pins; 0.5 mm FPC socket side, 1.0 mm FPC back side, 2.54 mm DIP |
| 4Pin 1.0 to 2.54 mm Double Row of Bent Pins Pull-down FFC FPC Adapter Board | USD 14.84 | 4 pins; 1.0 mm FPC socket side, 0.5 mm FPC back side, 2.54 mm DIP |
Where each board wins
The Zaplyte 10-pin board is the better fit for a connection that calls for its 10-pin arrangement and 0.5 mm socket-side pitch. Its reverse-side 1.0 mm pitch distinguishes it from the four-pin alternative while retaining the shared 2.54 mm DIP interface.
The uxcell four-pin board is the focused choice for a four-pin connection using a 1.0 mm FPC socket-side pitch. Its 0.5 mm back-side pitch and bent-pin, pull-down naming make it a separate layout choice rather than a smaller version of the 10-pin board.
Product notes
2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter
This board makes sense when the project specifically calls for the listed 10-pin format and right-angle pin-header arrangement. The title identifies a two-piece quantity, giving it a distinct advantage for a setup that needs a matched pair of the same adapter board. Its description also identifies double-sided PCB support and a single flat cable socket, while the stated overall size is 33 x 20 mm. The main constraint is straightforward: this is a 10-pin arrangement, so it is not the directly corresponding choice for a four-pin board format. Choose it for the stated 10-pin configuration rather than simply because both options are FFC/FPC adapter boards.
4Pin 1.0 to 2.54 mm Double Row of Bent Pins Pull-down FFC FPC Adapter Board
The uxcell board is the targeted option when a four-pin FFC/FPC connection is the intended format. Its title specifically calls out double-row bent pins and a pull-down configuration, and the description lists one FPC/FFC connector board in the package. At 32 x 17.5 mm, it has a slightly smaller stated footprint than the 10-pin alternative, which is a useful dimension for planning a board layout. Its limitation is the same feature that defines its purpose: the board is specified for four pins, not the 10-pin arrangement of the other option. Select it when its four-pin format is the exact requirement.
Final choice by use case
Choose the 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter for a 10-pin, right-angle project that benefits from the listed two-piece quantity. Choose the 4Pin 1.0 to 2.54 mm Double Row of Bent Pins Pull-down FFC FPC Adapter Board for a four-pin bent-pin layout. The listed price difference is $1.47, so the connector format is the more important deciding factor.
