Choosing keyboard switches is less about finding one universal feel and more about matching the pack to the job: a few replacements, a broader batch, or a hot-swappable board. The blue tactile and clicky choices here differ in quantity, compatibility wording, and price, with a $7.26 gap between the lowest and highest listed prices. Decide the project size first, then narrow the choice by switch feel and fit.
Quick take
- Small DIY repair or hot-swappable board: The 12 Pieces Blue Mechanical Keyboard Switches set has explicit compatibility language for most hot-swappable mechanical keyboards.
- Consistent tactile setup: The two Leezmark entries share the C01021-60 model and tactile-switches type; the lower-priced entry is the simpler tie-breaker.
- Clicky feel with pre-lubricated wording: The 50 Pieces Blue Mechanical Keyboard Switches and the 12 Pieces Blue Mechanical Keyboard Switches both specify clicky, pre-lubricated designs, but target different project sizes.
The comparison centers on blue tactile or clicky characteristics, so the practical decision is pack size, stated compatibility, and the price you want to pay.
Listed-price comparison
The four sets run from USD 9.73 to USD 16.99. The two Leezmark entries have the same displayed pack description and model, while the other two sets use different quantities and compatibility wording.
| Keyboard switch set | Listed price | Price bar |
|---|---|---|
| Leezmark 60 Pcs 3-PIN Blue Switches - C01021-60 | USD 14.22 | |
| Leezmark 60 Pcs 3-PIN Blue Switches - C01021-60 | USD 13.69 | |
| 50 Pieces Blue Mechanical Keyboard Switches, 3 Pin PreLubricated Clicky Key S | USD 16.99 | |
| 12 Pieces Blue Mechanical Keyboard Switches, 3 Pin Pre-Lubricated | Clicky Key S | USD 9.73 |
Decision matrix
- For a small replacement job: Choose the 12-piece blue set, especially when hot-swap compatibility is central.
- For a 60-piece tactile batch: Choose either Leezmark entry. The model, MPN, and type match; the USD 13.69 entry has the lower listed price.
- For a 50-piece clicky batch: Choose the Josojoou-branded set when acrylic and zinc alloy construction, transparent housing, and compatibility with most mechanical keyboards matter.
- For the lowest listed price: The 12-piece set is the direct pick, though its compact quantity is aimed at a smaller project.
Leezmark Blue 3-PIN Tactile Switches - USD 14.22
Leezmark's blue 3-pin tactile set is a straightforward pick for a consistent replacement run. Model C01021-60 and the tactile-switches type identify a focused configuration, while the set is positioned for keyboard clickers and replacement keys for most gaming keyboards. The concrete limitation is the fixed blue, 3-pin tactile format: a build seeking another switch feel or pin arrangement needs a different match. This entry makes sense when consistency matters more than adding a different switch style. Its identical title, model, and type also make it easy to compare directly with the other Leezmark entry, where the deciding distinction is the listed price rather than the stated switch configuration.
Leezmark Blue 3-PIN Tactile Switches - USD 13.69
Leezmark's matching blue 3-pin tactile set earns the practical tie-breaker because it carries the same C01021-60 model, MPN, and tactile-switches type as the other Leezmark entry while appearing at the lower listed price. That makes it a sensible route for a uniform tactile setup without changing the stated configuration. Its limitation is also clear: the choice stays tied to blue 3-pin tactile switches, so it is not aimed at a build requiring another feel or pin arrangement. Pick this entry when the Leezmark specification fits and price is the final separator; the matching entry offers the same stated identity at a higher listed price.
Blue 3-Pin PreLubricated Clicky Switches
The blue 3-pin pre-lubricated clicky set suits shoppers who want a clearly described click and tactile bump in a medium-size batch. It combines acrylic and zinc alloy construction, a transparent housing for LED backlighting, and compatibility with most mechanical keyboards. Those details give it a clear role when broad mechanical-keyboard compatibility and the stated visual design matter. The limitation is price: USD 16.99 is the highest listed figure in the comparison. Its quantity is also below the 60-piece Leezmark sets, so it favors a clicky-focused project over the largest quantity. Choose it for its explicit clicky and pre-lubricated wording, not merely for the blue color shared across the comparison.
Blue 3-Pin Pre-Lubricated Clicky Switches for Hot-Swappable Keyboards
For a small DIY job or worn-key replacement, the blue 3-pin pre-lubricated set has the most direct compatibility cue: it is compatible with most hot-swappable mechanical keyboards. The switches are also described as clicky, with a crisp sound and strong tactile bump, while specifications include 50gf operating force, 4mm total travel, and 2.2mm actuation. The limitation is the compact quantity, which may suit a few replacements but may not cover a broader keyboard refresh. Choose it when hot-swap compatibility and a smaller job come first; choose another pack when the project calls for more switches.
Final recommendation by use case
Choose the 12-piece blue pre-lubricated set for a small repair or a hot-swappable mechanical keyboard, since its compatibility wording is the most specific. Choose the lower-priced Leezmark entry for a consistent tactile setup; the other Leezmark entry remains a match when you want the same C01021-60 configuration. Choose the 50-piece clicky set when acrylic and zinc alloy construction, LED-friendly housing, and broad mechanical-keyboard compatibility are useful priorities. Across the comparison, the deciding trade-off is straightforward: compact repair pack, medium clicky batch, or larger Leezmark tactile format.
